Cooling Kit (Fans and Radiator)

DeLorean Part No.
200002
3 in stock. Usually dispatched today.
$618.99
Overview
DeLorean Europe Cooling Kit (Fans with aluminium shroud and high performance 2 row aluminium radiator).

If switching from an old radiator you will also need a pair of M10 bolts (replaces the bottom stud fitting). We also stock new rubber mounting bushes, which should be replaced at the same time (4 required) - along with 2 x SP10835 washer.

Is the radiator perfectly straight? No, not perfectly, it's made from aluminium and bends slightly - this is always the case with aluminium radiators, it is straight when bolted on though
Are all the fins perfect and immaculate looking? No, feel free to use a comb to perfect them, or don't worry about it...!
Do all of the holes line up? Not always - even if buying the condenser and fans from us, a bit of bending and wiggling *might* be required (not usually), sometimes (very very rarely) even a need to drill new holes, or widen them slightly. Being made from aluminium this is very easy to do though.
This is a highly popular product with several hundreds now sold all over the world, and well known for its highly efficient cooling and ease of installation.

The fan cowling has pre-drilled holes which matches most radiators, but since all are not the same you might have to drill extra holes in the cowling depending on your radiator - even when buying this kit with radiator from us. In nearly all cases you will need to bend, pull and wiggle to get the holes to line up, being made from aluminium this is a lot easier to do than it sounds....! In some cases you might consider use of spacing washers to aid installation to the radiator. This is a handmade product and far from cosmetically perfect, but nonetheless a very popular product.

For shipping purposes, the fans are supplied not attached to the aluminium shroud, so these need to be assembled using the 24 black stainless screws supplied.
-
+
DeLorean Europe Cooling Kit (Fans with aluminium shroud and high performance 2 row aluminium radiator).

If switching from an old radiator you will also need a pair of M10 bolts (replaces the bottom stud fitting). We also stock new rubber mounting bushes, which should be replaced at the same time (4 required) - along with 2 x SP10835 washer.

Is the radiator perfectly straight? No, not perfectly, it's made from aluminium and bends slightly - this is always the case with aluminium radiators, it is straight when bolted on though
Are all the fins perfect and immaculate looking? No, feel free to use a comb to perfect them, or don't worry about it...!
Do all of the holes line up? Not always - even if buying the condenser and fans from us, a bit of bending and wiggling *might* be required (not usually), sometimes (very very rarely) even a need to drill new holes, or widen them slightly. Being made from aluminium this is very easy to do though.
This is a highly popular product with several hundreds now sold all over the world, and well known for its highly efficient cooling and ease of installation.

The fan cowling has pre-drilled holes which matches most radiators, but since all are not the same you might have to drill extra holes in the cowling depending on your radiator - even when buying this kit with radiator from us. In nearly all cases you will need to bend, pull and wiggle to get the holes to line up, being made from aluminium this is a lot easier to do than it sounds....! In some cases you might consider use of spacing washers to aid installation to the radiator. This is a handmade product and far from cosmetically perfect, but nonetheless a very popular product.

For shipping purposes, the fans are supplied not attached to the aluminium shroud, so these need to be assembled using the 24 black stainless screws supplied.
More Information
DeLorean Part No. 200002
Source DeLorean Europe
New/Used New
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This part appears in the following categories:

Parts
Engine
Kits