Door Logo Projector Set

DeLorean Part No.
111532B
13 in stock. Usually dispatched today.
$35.99
Overview
Pair of under-door-area DMC logo projectors from DeLorean Europe, supplied with a drill bit.

Installation requires drilling 2 holes in the fibreglass tub (underneath the door opening, pointing at the floor - not in the actual door!) and the removal of some inner foam - connect the cables to the door light switch and install the lens with black sealant.
NOT supplied with instructions - see below for installation tips.
-
+
Pair of under-door-area DMC logo projectors from DeLorean Europe, supplied with a drill bit.

Installation requires drilling 2 holes in the fibreglass tub (underneath the door opening, pointing at the floor - not in the actual door!) and the removal of some inner foam - connect the cables to the door light switch and install the lens with black sealant.
NOT supplied with instructions.

You need a little extra space to install the projector, remove the aluminium ring, you don’t need that.
The lens itself can be pulled out of the projector, after it is installed back use some silicone around the outside to keep it clean inside. After drilling the hole, you will need to remove some of the old foam inside the fibreglass, you need this space to put some of the cables in. Lift the inner carpet up near the handbrake, drill a 6mm hole near your hole that you made before, pull the cables in and connect it with the door switch, now use some silicone or black glue to install the projector in place. Test if the angle of the projector is right.
More Information
DeLorean Part No. 111532B
Source DeLorean Europe
New/Used New
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
This part appears in the following categories:

Parts
Other
Electrical