Drive Shaft Seal Kit

DeLorean Part No.

K104216

In stock

Grouped product items
Part No.	Product Name	Qty
104216	Drive Shaft Lip Seal - double lipped $11.99
103013	O Ring Seal (Adjuster Ring) $1.99
103120	O Ring Seal (Final Drive) $0.70
SP10090	Differential Flange Pin $0.50
SP10090A	Differential Flange Pin Reinforcement $0.75
100119	CV Axle Boot Kit $14.95
100169R	CV Joint Retaining Ring $2.50
SP10013	Upgraded M10 Driveshaft Bolt $1.50
SP10036	M10 Spring Washer $0.30

Overview

Grouped for convenience - the 5 (6 for an auto) seals you typically need to replace to fix a leak from the drive shaft area of the gearbox (both manual and auto). 1 big o-ring for the adjusting nut (you need 2 for an auto), 2 small o-rings for the bearing end of the output shafts, and the 2 main oil seals (double lipped) for the flanges - or upgrade these to the "extreme" triple-lipped versions.
This is also a good time to replace the bolts with our modern DBolt™ upgraded drive shaft bolt set, and you might want to renew the 4 CV boots whilst you are there.

YOU WILL NEED TO CHANGE THE QUANTITY OF 103013 TO 1 IF YOU HAVE A MANUAL!

It is recommended to use the thin SP10090A pins on the inside of the SP10090 pins with the seams on opposite sides as this both reinforces the pin, and helps to stem any minor oil drips from the hole.