Removable Stainless CO Plug for Mixture Adjustment Screw
Part No.
102392A
49 in stock. Usually dispatched today.
7,99 €
Überblick
Removable CO Plug / CO2 Bung to replace the tamper-proof plug covering the metering head flap mixture adjusting screw, newly made by D Europe in stainless steel.
This is designed to first temporarily seal the hole in-between adjustments, then be pushed all the way in so the top of the rubber piece is flush with the hole. It will be very tight and requires the hole to be clean - this might mean widening slightly with something abrasive, depending on how the original tamper-proof plug has been drilled out.
We also stock a simpler and cheaper version of this.
Also suitable for use with many other k-jet / Bosch CIS cars - e.g. Porsche and Mercedes.
This is designed to first temporarily seal the hole in-between adjustments, then be pushed all the way in so the top of the rubber piece is flush with the hole. It will be very tight and requires the hole to be clean - this might mean widening slightly with something abrasive, depending on how the original tamper-proof plug has been drilled out.
We also stock a simpler and cheaper version of this.
Also suitable for use with many other k-jet / Bosch CIS cars - e.g. Porsche and Mercedes.
