Strona główna
Air Conditioning Overhaul Kit

Air Conditioning Overhaul Kit

Part No.

K100746

W magazynie

Podgląd

Complete kit for either overhauling your air conditioning refrigerant system and/or converting it to R134A, using our easy-to-install split hoses. This kit contains all of the items you would normally want to replace at the same time, and every part of the refrigerant system other than the separately available condenser and evaporator core. All items are compatible with both R134A and R12 (and replacement gasses).

The pre-filled quantities are everything in the pictures. Don't need to replace all of this? That's ok - change the quantities of the items you don't need to "0" before pressing "add to cart".
More details on each item are below at the bottom of the page.

Of the many versions of these items the factory used, this is the later version of the system, so in most cases it is required to replace the 110525 hose, 110527 adapter, 110120 dryer and 106918 valve all at the same time to ensure compatibility - those items are all in this kit.

Elementy produktów grupowanych
Part No.	Nazwa produktu	Ilość
100748	Air Con Compressor to Condenser Split Hose 126,99 GBP
100750	Air Con Compressor to Accumulator Split Hose 127,99 GBP
110525	Air Con Condenser to Evaporator Hose (requires 110527 if your car hasn't already got it) 66,99 GBP
109122	Orifice Tube 6,99 GBP
110527	Condenser Adapter Hub 45,99 GBP
106917	High Pressure Cut-out Switch 11,99 GBP
106918	Pressure Relief Valve 11,99 GBP
110120	Air Conditioner Dryer / Accumulator 29,99 GBP
100744	Low Pressure Switch 9,99 GBP
SP10015	M6 Bolt 0,35 GBP
SP10015SS	Stainless Bolt 0,50 GBP
SP10031SS	Stainless M6 Washer 0,25 GBP
SP10024	M6 Nyloc Nut 0,25 GBP
SP10024SS	Stainless M6 Nyloc Nut 0,40 GBP
100016	R134a Filling Nipples PAIR 12,99 GBP
111748T	Valve Core Tool 1,99 GBP
100746	R134A Air Conditioning Compressor Pump 269,99 GBP
110810	Label - A/C Compressor 1,99 GBP
105845	Compressor Hose Bracket 8,99 GBP
SP10446	Compressor Bolt 1,99 GBP
SP10033	M10 Washer 0,20 GBP
SP10779	M10 Bolt 0,75 GBP
SP10036	M10 Spring Washer 0,20 GBP
SP10028	M10 Nut 0,25 GBP
105505	Air Conditioning Drive Belt 11,99 GBP
106012	AC Accumulator / Dryer Bracket 5,25 GBP
100747	Compressor O Ring (2 required per car) 0,99 GBP
106866	O ring seal (AC system) (2 required per car) 0,50 GBP
106867	O ring seal (AC system) (2 required per car) 0,40 GBP
106868	O ring seal (AC system) (2 required per car) 0,40 GBP
106869	O ring seal (AC system) (2 required per car) 0,40 GBP
110526	High Pressure Switch Harness 20,99 GBP

Dodaj do listy życzeń Porównaj

Szczegóły

All parts are also sold separately - please see individual pages for more information - simply change the quantities of the items you don't need to "0" before pressing "add to cart". Some items have other versions available elsewhere on the website.

(1) 100748 Compressor to Condenser split hose suitable for use with R134A refrigerant. Supplied as two halves, rather than the original single hose - allows installation without separating the car body from the frame
(1) 100750 Compressor to Dryer Split hose - as above
(1) 110525 Condenser to Evaporator Hose - this hose is only compatible if you already have or order the 110527 adapter on the condenser
(1) 109122 Orifice Tube (goes in the evaporator)
(1) 110527 Adapter for switches which relocated the high pressure switch and pressure relief valve to the bottom of the condenser. You must purchase this if your car doesn't currently have one. This might also involve replacing the high pressure switch harness with the longer version - 110526 (below)
(1) 106917 High Pressure Switch
(1) 106918 Pressure Relief Valve
(1) 110120 Dryer (must always be replaced when changing any a/c part). Has an extra port that isn't used, but is left blank
(1) 100744 Adjustable Low Pressure Switch. Pre-set for R12, or turn the centre screw back (anti-clockwise) 1 full turn for use with R134A
(1) SP10015 / (2) SP10031 / (1) SP10024 Bolt/washers/nut for dryer clamp (stainless version also available)
(1) 100016 Pair of nozzle adapters to convert the R12 fittings on the hoses to R134A fittings. Requires removing the valve cores from the hoses before installing (these have their own valves)
(1) 111748T Valve core removal tool for above
(1) 100746 R134A compatible compressor - quieter 7 cylinder version, an improvement over the original, and with all-new parts. Direct fit with no swap of the back required. This mounts with the oil filler/drain on the side rather than the top. Comes with 180ml of PAG oil - either add another 60ml of PAG oil (which is preferable if replacing everything) or drain out and refill with 210ml of Ester oil if not replacing everything
(1) 110810 Compressor Label - for that sort-of factory correct look...!
(1) 105845 Compressor hose bracket
(1) SP10446 and (1) SP10033 bolt and washer for above
(6) SP10779 / (6) SP10033 / (6) SP10036 / (6) SP10028 Bolts/nuts/washers for compressor
(1) 105505 Drive belt for the compressor
(2) 100747 HNBR compressor o-ring - not needed if replacing the compressor
(3) 106866 HNBR o-ring - not all of these are needed if replacing everything, but spares are handy
(2) 106867 HNBR o-ring - not all of these are needed if replacing everything, but spares are handy
(2) 106868 HNBR o-ring - not all of these are needed if replacing everything, but spares are handy
(2) 106869 HNBR o-ring - not all of these are needed if replacing everything, but spares are handy
(1) 110526 High pressure switch harness - needed if your current high pressure switch is not already located on the condenser.

Więcej informacji