Strona główna
Fuel Filter with Installation Kit

Fuel Filter with Installation Kit

Part No.

K100523

W magazynie

Podgląd

Fuel Filter installation kit - the very best filter available - not a rebranded "made in wherever" filter, this is made in Europe - including everything you need to do the job. All items are available separately. Change the quantities on the items you don't need, or swap numbers on bolts etc. where there is a choice. By default the numbers pre-filled are everything in the pictures, plus a new clamp and a sachet of anti-seize needed for assembling stainless bolts.
More details on each item are below at the bottom of the page.

Elementy produktów grupowanych
Part No.	Nazwa produktu	Ilość
100523	Fuel Filter 18,99 GBP
106685	Fuel Filter Pad 1,75 GBP
106990	Elbow Fitting 11,99 GBP
PTFETape	PTFE Tape 0,99 GBP
100849	Fuel Filter Clamp 2,99 GBP
SP10742	Fuel Filter Clamp Screw 0,50 GBP
SP10742SS	Stainless Fuel Filter Clamp Screw 0,75 GBP
SP10742A	Allen Headed Stainless Fuel Filter Clamp Screw 0,75 GBP
SP10251	M4 Washer 0,20 GBP
SP10251SS	Stainless M4 Washer 0,25 GBP
SP10166	M4 Nyloc Nut 0,20 GBP
SP10166SS	Stainless M4 Nyloc Nut 0,25 GBP
SP10015	M6 Bolt 0,35 GBP
SP10015SS	Stainless Bolt 0,50 GBP
SP10031	M6 Washer 0,20 GBP
SP10031SS	Stainless M6 Washer 0,25 GBP
SP10024	M6 Nyloc Nut 0,25 GBP
SP10024SS	Stainless M6 Nyloc Nut 0,40 GBP
AntiSeize	Anti Seize Sachet 1,25 GBP

Dodaj do listy życzeń Porównaj

Szczegóły

Fuel Filter installation kit - all items available separately. Change the quantities on the items you don't need.

Modern replacement European made quality fuel filter, tried and tested - correct sealing face on the bottom (not a captive nut which will leak). Supplied with new sealing washers.
Fuel filter pad
Replacement elbow fitting to hard line. Straight thread which enables you to seal the filter with washers rather than PTFE tape (you will need PTFE tape if you aren't replacing this elbow).
Stainless allen headed clamp bolt (plus washers and nut), much easier to tighten up with limited access
Replacement hardware for the clamp - available in zinc plated or stainless.
5g sachet of anti-seize compound, used to help prevent stainless bolts from seizing/galling.

Więcej informacji