Polyurethane Front Girling Shock Bottom Bush Replacement

A polyurethane replacement for the bonded lower bush on original front Girling shocks, a good replacement if your original bushings are bad. Use either with your original metal inner sleeve, or purchase our 109080S replacement stainless inner sleeve and 100478SS stainless spacers.

These bushings are not a particularly tight fit in the shock and will require bonding in place. They are however a very tight fit lengthways in the lower arm when used with 100478 original or 100478SS spacers - you will either need patience to squeeze them in tight, or you may choose to shave the ends of them down slightly.