10 in stock. Usually dispatched today.
£15.99
Overview
3D printed plastic bottom access panel for the external RH (passenger side) wing mirror. You might choose to further finish and paint this to match your existing mirror texture.
Please note these are FRAGILE! Only really designed to be put in once, and even the first time please be sure it will go in fully before you start to put pressure on the legs - they will snap (just like the originals!) and you will have to resort to glue. Many mirrors are different by small amounts - you might need to file some of the edges of these to ensure a good fit BEFORE attempting to push down on the legs.
There were 2 types of mirrors used during production, with 2 completely different totally incompatible blanking cap types used. See the extra pictures to tell the difference between the two types - only really easily distinguished by the curved - or non-curved - edge on on one side.
This is the "curved edge" type - i.e. not flat at the corner/edge.
Please note these are FRAGILE! Only really designed to be put in once, and even the first time please be sure it will go in fully before you start to put pressure on the legs - they will snap (just like the originals!) and you will have to resort to glue. Many mirrors are different by small amounts - you might need to file some of the edges of these to ensure a good fit BEFORE attempting to push down on the legs.
There were 2 types of mirrors used during production, with 2 completely different totally incompatible blanking cap types used. See the extra pictures to tell the difference between the two types - only really easily distinguished by the curved - or non-curved - edge on on one side.
This is the "curved edge" type - i.e. not flat at the corner/edge.