Black Stainless Console Switch Alignment Bracket with upstand
Part No.
111177E
4 in stock. Usually dispatched today.
35,99 $
Vista general
Black painted stainless centre console switch retainer / aligner / switch alignment plate with padded upstand section to reduce accidental pressing of the switches. Supplied with screws and a drill bit to help attach it. We also stock alternative versions of this product.
It is designed to:
- Perfectly align the switches so they don't bind on the console and look more like the factory intended.
- Provide more depth clearance for certain new reproduction switches whilst making removal far easier.
- Provide a rear upstand / small padded armrest section to help prevent accidental knocking of the switches.
Check your switch width before installing - in some cases some of the reproduction switches will require a minor amount of filing of this plate (or the switch) to ease them in.
On this version, the centre switch hole is very slightly wider than the other 4, to help with getting the defrost switch in, which tends to be a little wider than the other switches.
It is designed to:
- Perfectly align the switches so they don't bind on the console and look more like the factory intended.
- Provide more depth clearance for certain new reproduction switches whilst making removal far easier.
- Provide a rear upstand / small padded armrest section to help prevent accidental knocking of the switches.
Check your switch width before installing - in some cases some of the reproduction switches will require a minor amount of filing of this plate (or the switch) to ease them in.
On this version, the centre switch hole is very slightly wider than the other 4, to help with getting the defrost switch in, which tends to be a little wider than the other switches.
