19 in stock. Usually dispatched today.
67,99 $
Vista general
Newly manufactured reproduction upper ball joint with a slightly wider shaft (M12). Supplied with Nylok nut. This is the D Europe version, made in China - we also stock our own version of these that does not require modifications.
This particular version uses a thicker threaded shaft, so to aid installation you need to carefully drill 2mm into your steering knuckle at the opposite end to where you insert the upper ball joint.
Attach EACH JOINT with 4 x SP10015 bolts, 4 x SP10024 nuts, and 8 x SP10031 washers. You would need to double these numbers for a pair of joints.
This particular version uses a thicker threaded shaft, so to aid installation you need to carefully drill 2mm into your steering knuckle at the opposite end to where you insert the upper ball joint.
Attach EACH JOINT with 4 x SP10015 bolts, 4 x SP10024 nuts, and 8 x SP10031 washers. You would need to double these numbers for a pair of joints.
