Complete Front Lower Suspension Arms Kit (PAIR)

Complete kit to replace both front suspension lower control arms and ball joints and all of the hardware used to hold them on - with all new parts.
These are completely plug and play with no modifications required and operate and fit in the same way as the originals.
All items are available separately (as are alternative versions) - change the quantities of the items you don't need to "0" before pressing "add to cart". Kit contains:
(2) 105177 Lower Control Arm - newly made (from thicker material - 2mm thick vs 1.6mm original) - with brand new 100154 bushing pressed in
(2) 109266 Our legendary UK made lower ball joint - supplied with rubber boot, circlip and modern day high tensile Nylok nut as standard (although they are pre-drilled for castle nut split pins too if you prefer). You will need to press these into the arms (we stock a tool for this if needed)

Since these ball joints are out of stock we instead recommend using the D Europe version, which we supply ready pressed in to the arms. This is preselected.

(1) SP10877 PAIR of castle nuts and stainless split pins for the (British made only) ball joints - not suitable for the D Europe versions

Hardware for the arms - none of the below is required if also installing the 105177PP Lower Arm Support Kit that we sell (as that comes with longer bolts and its own hardware):
(2) 101341 High tensile bolt for the middle bolt hole (holds the shock in place)
(2) 100477 High tensile bolt for the end bolt hole (holds the arm onto the frame)
(8) SP10058 Plated steel washer for the above bolts
(4) SP10059 High tensile Nyloc nut for the above bolts

We also stock a similar kit for the upper front suspension arms.