71 in stock. Usually dispatched today.
$31.99
Overview
Save your torsion bars from snapping!
Ordinarily the roof box should run level with the top of the rear window. With time though, we are starting to see very many cars where the bond on the roof box has started to fail, causing the box to lift and bow in the middle, as well as bend by the torsion bar retaining plates. Left unchecked the bonding would fail and the box would completely lift, which can then cause the very expensive torsion bars to fail!
This kit contains the items you need to repair this, along with comprehensive illustrated instructions. You will also need some tools, a list is provided. See the 2nd picture for dimensions to make an optional torsion bar adjustment jig. For maximum safety it is recommended to remove the torsion bars for this task, but many choose to leave these in place, and instead remove the door struts and prop the doors up as high as possible. Kit contains:
- 4 x long stainless bolts
- 4 x stainless Nylock nuts
- 8 x stainless penny washers
- 4 x replacement stainless SP10123 torsion bar retaining plate bolts
- 4 x replacement stainless SP10032 washers for above
- 4 x replacement stainless SP10035 spring washers for above
- Tube of Wurth Bond and Seal black sealant
- Complete illustrated instructions
Ordinarily the roof box should run level with the top of the rear window. With time though, we are starting to see very many cars where the bond on the roof box has started to fail, causing the box to lift and bow in the middle, as well as bend by the torsion bar retaining plates. Left unchecked the bonding would fail and the box would completely lift, which can then cause the very expensive torsion bars to fail!
This kit contains the items you need to repair this, along with comprehensive illustrated instructions. You will also need some tools, a list is provided. See the 2nd picture for dimensions to make an optional torsion bar adjustment jig. For maximum safety it is recommended to remove the torsion bars for this task, but many choose to leave these in place, and instead remove the door struts and prop the doors up as high as possible. Kit contains:
- 4 x long stainless bolts
- 4 x stainless Nylock nuts
- 8 x stainless penny washers
- 4 x replacement stainless SP10123 torsion bar retaining plate bolts
- 4 x replacement stainless SP10032 washers for above
- 4 x replacement stainless SP10035 spring washers for above
- Tube of Wurth Bond and Seal black sealant
- Complete illustrated instructions