A complete set of every banjo hollow fuel bolt on the car in stainless steel - complete with copper washers. Adjust quantities for the ones you don't need. The bolts are slightly different lengths to the originals which means on the 6 that screw into the injectors you need to use slightly thicker washers (102344A).
18 x 102343 bolt in stainless steel (injector lines x12, primary pressure line x2, cold start valve line x2, control pressure line x1, frequency valve x1)
1 x 102351 bolt in stainless steel (control pressure line)
2 x 102369 bolt in stainless steel (supply hose, fuel filter)
1 x 102358 double banjo bolt in coated steel - this one isn't stainless (frequency valve/return hose)
24 x 102344 copper washer (injector lines x12, primary pressure line x4, cold start valve line x4, control pressure line x2, frequency valve x2)
12 x 102344A thick copper washer (injectors x12)
2 x 102352 copper washer (control pressure line x2)
7 x 102360 (frequency valve x1, return hose x2, supply hose x2, fuel filter x2)
Remove 1 x 102343 bolt and 2 x 102344 washers, and 1 x 102358 double banjo and 1 x 102360 washer and add 1 x 102369 bolt if you are using a Volvo fuel distributor (because you don't have a frequency valve)
Remove 2 x 102360 washers if you are replacing the fuel filter with one that has washers included.